1-50mm Thickness Soft Close Cell EPDM Insulation Foam For
Construction
The temperature resistance of different EPDM foam specifications
varies, affecting their suitability for use in high or low
temperature environments.
- Standard heat-resistant EPDM foam: Suitable for use in electronic
equipment sealing and vibration reduction applications at room
temperature, with a temperature range generally between -40°C and
120°C.
- High-temperature EPDM foam: Made through a special formula and
process, it can withstand higher temperatures (up to 150°C) and is
suitable for sealing electronic devices in high-temperature
environments, such as automotive electronics and industrial
equipment.
Specification:
EPDM(Closed cell)Physical Properties:
| Name&Model | Color | Density
(kg/m³) | Hardness
(Shore C°) | Tensile Strength
(Kpa) | Elongation
(%) | Compression Deformation
(%) | Tear Strength
(kn/m) | Size(mm) | Remarks |
| EPDM-9016 | Black | 190±15 | 25°±5 | ≥500 | ≥130 | ≤40 | ≥3.0 | 950*1900*40 | |
| EPDM-9015 | Black | 150±15 | 15°±5 | ≥400 | ≥120 | ≤45 | ≥2.0 | 1000*2000*50 | |
| EPDM-9010 | Black | 130±15 | 10°±3 | ≥350 | ≥120 | ≤35 | ≥1.8 | 1000*2000*50 | |
| EPDM-9008 | Black | 110±15 | 8°±3 | ≥350 | ≥120 | ≤35 | ≥1.8 | 1000*2000*50 | |
| EPDM-WS | Black | 150±15 | 15°±5 | ≥400 | ≥120 | ≤40 | ≥2.0 | 1000*2000*50 | Sulfur free |
| EPDM-GBZ | Black | 250-500 | 30°-50° | ≥800 | ≥130 | ≤20 | ≥5.0 | 900*1800*35 | High density |
| EPDM-GYD | Black | 600-700 | 50°-75° | ≥1200 | ≥90 | ≤10 | ≥8.0 | 600*1200*30 | High hardness |
| EPDM-SMP | Black | 300±25 | 18°±5 | ≥500 | ≥150 | ≤25 | ≥2.0 | 400*500*568 | Double sided crust |
EPDM (Open cell) Physical Property:
| Name&Model | Color | Density
(kg/m³) | Tensile Strength
(Kpa) | Elongation
(%) | Compression Deformation
(%) | Tear Strength
(kn/m) | Size(mm) | Remarks |
| EPDM-10 | Black/Red/White | 100±15 | ≥100 | ≥200 | ≤3.1 | ≥0.5 | 1000*2000*60 | |
| EPDM-10Z | Black/Red | 100±15 | ≥100 | ≥200 | ≤3.1 | ≥0.5 | 1000*2000*60 | Fire retardant |
| EPDM-20 | Black | 85±15 | ≥100 | ≥200 | ≤3.1 | ≥0.5 | 1000*2000*30 | |
The difference between EPDM ,NBR and CR rubber foam:
| Comparison of rubber foam performance parameters |
Performance | EPDM Rubber Foam | NBR Rubber Foam | CR Rubber Foam |
Aging resistance | good | poor | good |
electrical insulation | very good | poor | poor |
preservative | good | general | good |
Impact elasticity | good | general | -- |
Adhesion properties | poor | good | -- |
Oil resistance | no | very good | good |
Wear resistance | good | good | -- |
Heat resistance | very good | good | good |
Cold resistance | very good | poor | poor |
Ozone resistance | good | -- | good |
Weather resistance | very good | general | very good |
Flame resistance | no | -- | good |
Acid resistance | good | good | general |
Alkali resistance | good | good | good |
FAQ:
Q1:Do you accept customized foam products ?
We have customized production service, we can produce foam products
as per client’s requests.
Q2:How can I place an order?
1)Tell us the size details and quantity you want to order.
2)We will make PI for you.
3)Checking PI and confirm it for us, we will arrange the production
ASAP when the prepayment received.
4)We will take photos for you to confirm and then deliver the goods
soon after the balance.
5)Send the Customs Clearance Documents or tracking number to you
and track the goods for you until you get it.
Q3:How to get samples ?
Send enquiry to cissy@eco-polyfoam.com, with your details of the
foams need, we will check reply in 24 hour
